|
| |
Catalyst Control Console 1024
The Catalyst Control Console provides the Pyrotechnic Operator with all the
power and control needed to setup, test and execute a professional fireworks
show by any method he/she chooses. It allows completely manual firing (choose
the "rail/module" and cue to fire) to completely automated shows. Automatic stepped
firing (Group Mode = set shells into different groups and fire the next
available CUE in each group by touching the selected group button), Sequence
Mode allowing totally automated firing of a complete show, Time-code Mode which
is the same as Sequence Mode except that the show timing is derived from a
master time-code source. For a detailed tour of the
CCC front panel, you can go here.
Key Benefits & Features
- Self contained power source with internal charger/power supply
- State-of-the-art LCD color touch-screen operator display for all control
functions
- Globally unique Operator security "key" required for console access and
arming
- Console will "prompt" for Security Key whenever it is needed
- Built-in detachable LED work light with adjustable intensity
- SD-card reader/writer for data transfers to/from Console
- Computer data-port for data transfers to/from Console
- Balanced/Unbalanced audio inputs for time-code sync inputs
- Dead-man switch input for use during automated sequences
- Controls up to 32 Firing Modules* for a
total of 1024 cues
- Able to fire all cues on all Firing Modules simultaneously, not limited
to 8 Firing Modules like other systems
- "Long-Run" Pyro-Power technology to allow operation of Firing Modules at
great distances
- "Bare-wire" interconnects between CCC and FM units (no connectors to
break, fail or get dirty)
- Rugged, waterproof case -- resists rough handling and ground moisture
- When case is properly closed, it will even float its weight of 24 lbs!
- Built-in Shell Timing utility to gather pre-fire times on various
shells/manufacturers
- Cue Check screens to verify Firing Module and Cue locations
- Direct Fire screen to allow Firing Module and Cue firing to scripts
- Group Fire screen to allow auto-step firing to scripts or assisted
un-scripted shows
- Sequence Fire screen to execute music synchronized shows
- Group "lockout" feature to block firing of pre-assigned groups of cues
without affecting remaining show
- Configuration screen to set screen backlight brightness, work-light
brightness, FM heart-beat, etc
- Sequence Load screen to import show timing from SD-card or Data-port
- Built-in enhanced 3-mode power supply/charger to run console off of AC and maintain
proper battery charge
- Internal batteries may be left on charge indefinitely without over-charging
- Power supply/Charger status LED's indicate AC power present and Charging
status
- Power-on of Firing Modules monitors for over-current during startup and
will detect shorts and shutdown
- Supported by ShowSim software, the best Pyro-Show Scripting software available
* - In actual fact the CCC-1024
can address all 100 FM units. However, anything above the 32 recommended
unit maximum will begin draining the internal batteries at a rate faster than
they can be charged if the unit is running on AC power. This does not mean
however that the CCC unit will be damaged, it means that special attention must
be paid to how long the unit is in operation. The CCC-3200 system is
designed to handle up to 100 FM units without the limitation on battery charge
and accomplishes this by several enhancements including upsized
charger/power-supply and significantly increased battery capacity.
Pricing
| Description |
SKU # |
Price |
| Catalyst Control Console 1024 (Timecode) |
90-0001-01 |
$2999 |
| Catalyst Control Console 1024 (no Timecode) |
90-0001-02 |
$2499 |
| Catalyst Control Console 3200 (Timecode) |
90-0002-01 |
$4999 |
| Catalyst Control Console 3200 (no Timecode) |
90-0002-02 |
$4499 |
|
