Home
Control Console
Firing Module
Pyro-Tilt Sensor
Remote Console
Pyro-Cable

 

Catalyst Control Console

Self-contained control console that forms the heart of the pyrotechnic show equipment. The CCC-1024 model upports up to 32 Catalyst Firing Modules each handling 32 CUEs for a total of 1024 unique show "cues/events". The CCC-3200 model supports 100 Firing Modules giving a total cue/event-count of 3200! The Catalyst Control Console (CCC) may be operated from internal batteries or from 120/240vac (factory set).  No external computer is needed to function in any of the five firing modes (Direct, Group, Sequence, Timecode or Shell Timing). Show sequence and Shell timing data are transferred to/from the CCC either through the integrated SD-card reader or the computer data-port.  A show sequence may be loaded "at the office" and the CCC will retain the show indefinitely, or the show may be loaded/changed at the show site.  Security is controlled by the use of a globally unique electronic key (iButton) that only the Operator/Safety Officer controls to allow access to the CCC and/or take the console from Safe mode to Arm mode.

Catalyst Firing Module (FM-32)

A 32-CUE firing module using advanced Capacitive Discharge technology.  Interconnect cabling between the CCC and FM units consists of simple two-wire connector-less "lamp cord" allowing Firing Modules to be connected in whatever fashion that makes sense for the particular show being setup. Special termination or "end-of-line" units are not needed using our proprietary communication protocols. "Booster Boxes" are a thing of the past with the Catalyst System.

Catalyst Pyro-Tilt Sensor

An innovation totally unique to the Catalyst system, this small unit may be attached to any supporting structure (rack, trough, pole, etc) that needs real-time monitoring during a show to insure that changes in angle do not occur.  Should the angle change by more than a preset amount (±15 degrees), the Pyro-Tilt sensor signals the associated Firing Module to cease all further CUE fires without any action by the Pyro-Shooter/Operator.  This is strictly a safety device that operates in a fail-safe mode.

Catalyst Remote Console

Self-contained Remote Console that allows wireless connection to those odd remote locations where running wires is either cumbersome or impossible. Supports up to 34 Catalyst Firing Modules, each handling 32 CUEs. The Catalyst Remote Console (CRC) may be operated from internal batteries or from 120/240vac (factory set).

Catalyst ShowSim Show Scripting and Choreography software

State-of-the-Art Pyrotechnic show scripting software that allows you to preview what your show will look like. A highly integrated show choreography software package that includes many features that other packages require you to purchase additional/separate tools to accomplish.  Check out the ShowSim advantage here.

 

Home ] Control Console ] Firing Module ] Pyro-Tilt Sensor ] Remote Console ] Pyro-Cable ]

Send mail to Catalyst-Pyro@BizzyBitz.com with questions or comments about this web site.
Last modified:  11/24/06